Afitox XP BMIBC 150/250 (300)V (10P-0,75 mm²)

Construction

1. Conductor: stranged annealed tinned copper wires class 2; IEC 60228; each core made up of 7 stranded copper wires;
2. Insulation: HF XLPE halogen free crosslinked polyethylene;
3. Shield: individual shield of aluminium/polyester tape (0,065mm thick) with stranded tinned copper drain conductor 0,5mm² (7wires);
4. Separator: polyester tape;
5. Armour/Shield: plain copper wire braid (without additional drain wire);
6. Outer Sheath: grey thermoplastic polyolefin halogen free compound (SHF1).

Identification of Cores:
pair - black and white coloured insulation; each pair with printed numbers.

Assembly of Cores: twisted pairs (cabled with fillers where necesary to make round).

Routine Tests:

• electrical resistance of conductor;
• electric voltage;
• insulation resistance referred to 20°C.

Packing: wood reels in accordance with the terms of NBR 11137.

Tolerance: thickness and dimensions are considered as nominal values, subject to industry tolerance.

Minimum Bending Radius: values according to nominal outside diameter. During installation, must be used eight times the measured diameter.

This product is part of our Shiplink® offer.