These cables are built under strict quality levels, ensuring good responses even at higher frequencies or mixed transmission technologies onto the same cable. Over a wide range of conductor diameters, pair capacity and different application possibilities, Nexans Brazil takes place as one of the largest cable supplier of the country.
StandardsNational : ABNT NBR 9124
Construction: Soft annealed bare copper conductor, 0.40, 0.50, 0.65 or 0.90mm nominal diameter, insulated with colored solid polyethylene. The insulated conductors are twisted in pairs and assembled in layers and/or groups to form a substantially cylindrical core. The cable core is bound with binder threads and/or a binder polyester tape and shielded by a flat polyethylene-clad aluminium tape (LAP - Laminated Aluminium Polyethylene), longitudinally applied. A black polyethylene jacket is extruded over the shield. Under the jacket, two ripcords are applied to ease the jacket removal. Service pairs may be available, according to the Brazilian Standard ABNT/NBR 9124, upon customer request.
Application: These cables are intended for analogical or digital signal transmissions.
Installation: Aerial, lashed to a messenger, or in buried duct.
|Conductor material||Bare annealed copper stranded|
|Maximum average unbalance capacitance pair-to-pair||45.3pF/km|
|Maximum unbalance capacitance pair-to-pair||181pF/km|
|Maximum average unbalance capacitance pair-to-ground||574pF/km|
|Maximum unbalance capacitance pair-to-ground||2625pF/km|
|Minimum insulation resistance||15000MOhm.km|
|Test voltage AC at 50hz conductor/screen||10000V|
|NEXT, minimum individual at 150 kHz||53.0dB|
|NEXT, minimum individual at 1024 kHz||40.0dB|
|ELFEXT, minimum average at 150 kHz||68.0dB/km|
|ELFEXT, minimum individual at 150 kHz||58.0dB/km|
|ELFEXT, minimum average at 1024 kHz||52.0dB/km|
|ELFEXT, minimum individual at 1024 kHz||35.0dB/km|
|See all products|
Products and services
Docs and info
NEXANS YYYY CTP-APL DD/XXXX OP-ZZZZZ LLLL
YYYY = Year of manufacturing;
DD = Conductor nominal diameter;
XXXX = Pair count;
ZZZZZ = Purchase order;
LLLL = Metric length (m)
The marking is made on the jacket, at each meter, along the cable axis.
Other markings can be done, upon request.