Afitox SM BMC 150/250 (300)V (With no communication pair)

Construction

1. Conductor: stranged annealed tinned copper wires class 2; IEC 60228; each core made up of 7 stranded copper wires;
2. Thermal Barrier: layer of mica tape;
3. Insulation: HF XLPE halogen free crosslinked polyethylene;
4. Separator: polyester tape;
5. Shield: over shield of aluminium/polyester tape (0,065mm thick) with stranded tinned copper drain conductor 0,5mm² (7 wires);
6. Outer Sheath: grey thermoplastic polyolefin halogen free compound (SHF1). Orange for telecom cables (UV protected) and blue for instrinsically safe areas application. Marked with red strip.

Identification of Cores:
pair - black and white coloured insulation; each pair with printed numbers;
triad - black, white and green coloured insulation; each triad with printed numbers;
quad - black, white, green and red coloured insulation (technical information can be request).
 

Assembly of Cores: twisted pairs, triads or quads (cabled with fillers where necesary to make round).

Routine Tests:

• electrical resistance of conductor;
• electric voltage;
• insulation resistance referred to 20°C.

Packing: wood reels in accordance with the terms of NBR 11137.

Tolerance: thickness and dimensions are considered as nominal values, subject to industry tolerance.

Minimum Bending Radius: values according to nominal outside diameter. During installation, must be used eight times the measured diameter.

This product is part of our Shiplink® offer.